Seajet Emperor 034 Antifoul 2.5L - All Colours
As low as
£139.98
In stock
Only %1 left
SKU
Configurable_MAAF1083
The Seajet Emperor 034 Antifoul is perfect for very high fouling areas due to its great performance against slime and weed, making it ideal for club racers.
Seajet Emperor 034 Antifoul 2.5L - All Colours
Save £5 on Blue Gee Bilgex Bilge Cleaner & £7 on Star Brite Non-Skid Deck Cleaner when purchased with this antifoul*.
The Seajet Emperor 034 Antifoul is a high performance, self-polishing antifoul which is perfect for aluminium due to there is no risk of galvanic corrosion. The Seajet Emperor is ideal for very high fouling areas, and is suitable for all types of boats. This antifoul provides great performance against slime and weed.
The Seajet Emperor 034 is the perfect choice for club racers as it can be burnished during the season.
Specifications
- Available in: Black, White, Red, Navy or Mid Blue
- Bright colours
- Suitable for salt, fresh & brackish water
- Can be used on GRP, wood, steel & aluminium
- For use below the waterline
- Can be applied via brush, roller & spray
- Two coats will last up to two seasons
- Boats up to 40 knots
- Recommended thinner: Seajet Thinner A
- Coverage: 10m²/L
- Surface dry after 1 hour at 20? (68?)
- Hard dry after 5 hours at 20? (68?)
*One item per purchase. Discount applied at checkout.
Frequently Asked Questions
5? (41?)
- Surface dry after 3 hours
- Hard dry after 12 hours
- Dry to launch after 24 hours
10? (50?)
- Surface dry after 2 hours
- Hard dry after 8 hours
- Dry to launch after 18 hours
20? (68?)
- Surface dry after 1 hour
- Hard dry after 5 hours
- Dry to launch after 12 hours
30? (86?)
- Surface dry after 30 minutes
- Hard dry after 4 hours
- Dry to launch after 10 hours
Existing Antifoul (good condition)
- High pressure was to clean the surface.
- Check the Seajet Compatibility Chart
- If compatible, apply direct.
- If not compatible or unknown, apply a barrier coat of Seajet 015 Underwater Primer
Existing Antifoul (poor condition)
- Chemically strip or wet sand off all antifouling.
- Ensure the surface is dry and free of contamination.
New (steel, wood & aluminium)
- Sand with P100 abrasive paper.
- Remve all dust.
- Seajet 015 Underwater Primer
- Seajet 117 Multi-Purpose Epoxy Primer
| SKU | Configurable_MAAF1083 |
|---|---|
| MPN | 634VR0013-2 |
| EAN / GTIN | 8716545360227 |
| Brand | Seajet |
| Range | Emperor |
| Paint Size | 2.5L |
| Area Of Use | Below The Waterline |
| Time To Dry | 1 hour at 20°C |
Write Your Own Review