International Primocon Antifoul Underwater Primer 750ml - Grey
Primocon is a grey, tar-free, quick drying, conventional primer for all substrates underwater. Also suitable as a barrier/ sealer coat over incompatible or unknown antifoulings.
International Primocon Antifoul Underwater Primer 750ml - Grey | YPA984/750
The International Primocon Underwater Primer is an amazing one-part primer which is designed for use below the waterline before antifouling is applied. This primer is fast drying, even in poor conditions and can be applied via a brush, roller or an airless spray.
The International Priocon Underwater Primer is an aluminium pigmented, vinyl anti-corrosive primer than can be recoated with itself after long periods, and is formulated for timber, steel, aluminium, cast iron keels and lead keels. This primer can be used under all International antifoulings or as a barrier/sealer coat over incompatible or unknown antifoulings. Not suitable to be overcoated with 2-component solvent-based paints.
Features
- Tar-free
- Fast dry
- Anti-corrosive
- Formulated for timber, steel, aluminium, cast iron keels and lead keels
- Can be applied via brush, roller or airless spray
- Recommended thinner: International Thinners No. 3 (available as 500ml and 1L)
- Coverage: 7.4 m²/L per coat by brush
- Touch dry after 1 hour at 23℃ (73℉)
Frequently Asked Questions
Touch dry after:
- 1.5 hours at 5℃ (41℉)
- 1 hour at 15℃ (59℉)
- 1 hout at 23℃ (73℉)
- 1 hour at 35℃ (95℉)
- Minimum: 3 hours
- Maximum: ext
Bare GRP
- Sand using 180-220 grade abrasive paper.
- Remove sanding dust.
Bare Wood/Plywood
- Sand smooth with 80-180 grade abrasive paper.
- Sand again with 280 grade abrasive paper.
- Remvoe sanding dust by brushing, dusting or wiping.
- If wiping with solvent, allow to dry completely.
Aluminium
- Degrease with solvent, liquid detergent or International Super Cleaner.
- Sand well using aluminium compatible 24-120 grade abrasive paper.
- Coarser grades are recommended to achieve optimum adhesion.
- Clean thoroughly & allow to dry.
- Pre-prime using a suitable International Primer as soon as possible (within 8 hours).
Zinc / Galvanised Steel
- Degrease with solvent, liquid detergent or International Super Cleaner.
- Sand well using 60-12 grade abrasive paper.
- Clean thoroughly & allow to dry.
- Pre-prime using a suitable International Primer as soon as possible (within 8 hours).
Lead
- Degrease with solvent, liquid detergent or International Super Cleaner.
- Sand well using 120 grade abrasive paper or power wire brush.
- Clean thoroughly & allow to dry.
- Pre-prime using a suitable International Primer as soon as possible (within 8 hours).
Steel
- Gitblast to 2½ - near white metal surface.
- If gritblasting is not possible, grind the metal surface with 24-36 grit abrasive discs.
- Use an angle grinder on small areas.
| SKU | MAPV1130 |
|---|---|
| MPN | YPA984 |
| EAN / GTIN | 5035686098695 |
| Brand | International |
| Range | Primocon |
| Colour | Grey |
| Paint Size | 750ml |
| Loyalty Discount | Yes |
| Area Of Use | Below The Waterline |
| Time To Dry | 1 hour at at 23°C |