International Perfection Plus Varnish - 750ml
The ultimate in varnish performance, combining excellent chemical and abrasion resistance with superb gloss. The improved formulation of Perfection Plus contains UV filters to give it the longest possible life.
International Perfection Plus Varnish 750ml - YVA950 / YVA951
Please note: This has been discontinued - Click here to see other varnishes available.
The ultimate in varnish performance, combining excellent chemical and abrasion resistance with superb gloss. The improved formulation of Perfection Plus contains UV filters to give it the longest possible life.
Up to four times longer service life than conventional 1-part varnishes Fully compatible with oily woods like teak and iroko after adequate degreasing and substrate preparation Chemical cure gives resistance to fuels, oil and mild acids and alkalis.
Specifications
- Two-part polyurethane varnish
- Suitable for interior and exterior
- Fully compatible with oily woods
- Resistance to fuels, oil and mild acids and alkalis
- Chemical and abrasion resistance
- For sea & fresh water
- Can be used on wood
- Gloss finish
Frequently Asked Questions
- Touch dry after 10 hours (10℃ / 50℉)
- Touch dry after 4 hours (23℃ / 73℉)
- Touch dry after 3 hours (35℃ / 95℉)
- Hard dry after 24 hours (10℃ / 50℉)
- Hard dry after 16 hours (23℃ / 73℉)
- Hard dry after 12 hours (35℃ / 95℉)
Prevously Painted Surfaces
- Wash down with suitable detergent, rinse with fresh water and allow to dry
- Abrade with 320 - 400 grade paper
Alternatively, if the paint is in bad condition, remove all previous coatings and prime the substrate.
Bare Wood
- Sand smooth with 120 grade paper, followed by 240 and finally 320 grade paper
- Remove sanding dust by brushing, dusting and wiping
- If wiping with solvent, allow to dry completely before applying the first coat
- Prime if required, with Clear Wood Sealer Fast Dry
- If Clear Wood Sealer has been omitted thin the first coat by 20-25% with Thinner No.9.
Oily Woods (e.g. Teak)
- Adequately degrease (Thinner No.9 recommended)
- Ensure the surfae is completely dry before applying the first coat
- Sand areas that are loose or flaking with 320 grade paper
For bare wood, thin the first coat by 25% using the recommended thinner and then apply a minimum of 4 full coats. Alternativly, if a minimum of four coats of Clear Wood Sealer have been applied, then only 2 coats of Perfection Plus are required.
| SKU | MAPV1120 |
|---|---|
| MPN | YVA950 / YVA951 |
| Brand | International |
| Range | Perfection Plus |
| Colour | Colourless |
| Paint Size | 750ml |
| Loyalty Discount | Yes |
| Time To Dry | 4 hours at 20°C |
| UV Resistance | Yes |