Hempel Silic One Tiecoat - 750ml
This amazing, biocide free product is based on silicone and hydrogel, which gives the coating surface water-like properties.
Hempel Silic One Tiecoat - 750ml | 27450-23410
This amazing, biocide free product is based on silicone and hydrogel, which gives the coating surface water-like properties making it difficult for fouling organisms to attach to the hull and easy for them to be removed when the boat is in motion. Other amazing benefits are simple fouling cleaning and easy reapplication, resulting in long term cost reduction.
For the best application, be sure to carefully read the preperation and application instructions. The Hempel Silic One Tiecoat cannot be tinned and must be kept above 10℃ / 50℉ during the application and curing process.
Features
- Semi-gloss
- Can be applied with a brush or roller
- Coverage: 10 m²/L
- Hard dry after 3 hours (10℃ / 50℉)
- Hard dry after 1 hour (30℃ / 86℉)
- Fully cured after 4 days (10℃ / 50℉)
- Fully cured after 1 day (30℃ / 86℉)
Frequently Asked Questions
- Hard dry after 3 hours (10℃ / 50℉)
- Hard dry after 1.5 hours (20℃ / 68℉)
- Hard dry after 1 hour (30℃ / 86℉)
- fully cured after 4 days (10℃ / 50℉)
- fully cured after 2 days (20℃ / 68℉)
- fully cured after 1 day (30℃ / 86℉)
It is recommended to have used Hempel's Light Primer, Hempel's Conversion Primer or Hempel's Silic Seal as the previous coat.
If the existing primer is a non-epoxy primer or a one component primer, then the primer must be removed, and the surface must be primed with 4-5 coats of one of the above primers.
You can use the Hempel Silic One Tiecoat below the waterline on glass fibre, steel, aluminium and plywood vessels.
| SKU | MAAF1025 |
|---|---|
| MPN | 27450-23410 |
| Brand | Hempel |
| Range | Silic One |
| Datasheet | Hempel Silic-One Tiecoat Datasheet |
| Paint Size | 750ml |
| Time To Dry | 2 hours at 20°C |