Epifanes Wood Finish 500ml

Clear, high gloss finish suitable for all types of wood. Because of it's microscopic porosity properties, this finish ensures good adhesion on oily and vaporous woods like teak and iroco (not suitable for bankirai). Due to its unique formulation, this finish does not require sanding between coats (provided recoating occurs within 72 hours). For use on bare wood and/ or the maintenance of existing, intact oil or varnish systems. It is compatible with conventional varnish. Woodfinish Gloss provides a quick, easy approach to a superior, high gloss finish without sacrificing integrity or longevity. Provides maximum UV protection in all climates. Surface preparation: Clean wood and sand surface using 180 grit dry abrasive paper. Degrease thoroughly with Epifanes Spray Thinner for Paint and Varnish, or other suitable degreaser and allow to evaporate completely. Remove all dust. Do not use water! Application on Teak, Iroco and other oily woods: On bare wood, apply first coat thinned 25%. Apply an additional 4-5 coats thinned 0-5% allowing 24 hours cure time (65F) between coats. Application on Mahogany and other non-oily woods: On bare wood, apply first coat thinned 50% allowing 24 hours cure time and sand with 280 grit dry abrasive paper. Apply second coat thinned 25% allowing 24 hours cure time and sand with 320 grit dry abrasive paper. Apply third second coat thinned 10% allowing 24 hours cure. Apply at least an additional 5 coats thinned 0-5% allowing 24 hours cure time between coats. Sanding before final coat (400 wet) is recommended to maximize the overall appearance of the finish.